Users Guide

Parameters
A.B.C.D:
[1-65535]
Manually configure the RD with a 4-octet IPv4 address, then a 2-octet-number
from 1 to 65535.
auto
Configure the RD to automatically generate.
Default Not configured
Command mode EVPN-EVI and EVPN-VRF
Usage
information
A RD maintains the uniqueness of an EVPN route between different EVPN instances. Configure a route
distinguisher in a tenant VRF used for EVPN symmetric IRB traffic. The RD auto-configures as Type 1
from the overlay network source IP address and the auto-generated EVPN instance ID.
The rd auto command is not supported in EVPN-VRF mode. When you create a VRF in EVPN mode,
the RD is automatically generated. The rd A.B.C.D:[1-65535] command is supported in EVPN-VRF
mode in 10.5.1 and later releases.
Example
OS10(config)# evpn
OS10(config-evpn)# evi 10
OS10(config-evpn-evi)# vni 10000
OS10(config-evpn-evi)# rd 111.111.111.111:65535
OS10(config)# evpn
OS10(config-evpn)# vrf vrf-blue
OS10(config-evpn-vrf-vrf-blue)# rd 111.111.111.111:65000
Supported
releases
10.4.2.0 or later
redistribute l2vpn evpn
Redistributes L2VPN EVPN routes into BGP and OSPF IPv4/IPv6 routes.
Syntax
redistribute l2vpn evpn [route-map map name]
Parameters
● route-map map-name — (Optional) Filter the L2VPN EVPN routes that are redistributed in BGP
and OSPF.
Default None
Command Mode ROUTER-BGPv4-AF, ROUTER-BGPv6-AF, ROUTER-OSPF, or ROUTER-OSPFv6
Usage
Information
Use the redistribute l2vpn evpn command to redistribute the L2VPN EVPN routes learned in
non-default tenant VRFs for BGP and or OSPF IPv4/IPv6 routing.
Example
OS10(config)# router bgp 101
OS10(conf-router-bgp-101)# vrf blue
OS10(conf-router-bgp-101-vrf)# address-family ipv4 unicast
OS10(configure-router-bgpv4-af)# redistribute l2vpn evpn
OS10(config)# router ospf 1 vrf GREEN
OS10(config-router-ospf-1)# redistribute l2vpn evpn
OS10(config)# router ospfv3 2 vrf GREEN
OS10(config-router-ospfv3-2)# redistribute l2vpn evpn
Supported
Releases
10.5.1 or later
route-target
Configures the Route Target (RT) values that EVPN routes use.
Syntax
route-target {auto | value {import | export | both} [asn4]}
VXLAN 1175