Users Guide

Table Of Contents
show lldp timers
Displays the LLDP hold time, delay time, and update frequency interval configuration information.
Syntax
show lldp timers
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show lldp timers
LLDP Timers:
Holdtime in seconds: 120
Reinit-time in seconds: 6
Transmit interval in seconds: 30
Supported
Releases
10.2.0E or later
show lldp tlv-select interface
Displays the TLVs enabled for an interface.
Syntax
show lldp tlv-select interface ethernet node/slot/port[:subport]
Parameters ethernet node/slot/port[:subport] Enter the Ethernet interface information, from 1 to 253.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show lldp tlv-select interface ethernet 1/1/1
port-description
system-capabilities
system-description
system-name
port-vlan
mac-phy-config
link-aggregation
max-frame-size
vlan-name
Supported
Releases
10.2.0E or later
show lldp traffic
Displays LLDP traffic information including counters, packets that are transmitted and received, discarded packets, and
unrecognized TLVs.
Syntax
show lldp traffic [interface ethernet node/slot/port[:subport]]
Parameters interface ethernet node/slot/port[:subport] (Optional) Enter the Ethernet interface
information to view the LLDP traffic.
Default Not configured
Command Mode EXEC
Layer 2 587