Concept Guide

● Leaf—Select a leaf switch from the rack, and an interface or multiple interfaces of the leaf switch to be associated with
the uplink.
5. Select the static or dynamic LAG based on the configuration setup in the external network, and click Next.
6. Create a L3 VLAN network by providing name, description, and VLAN ID, and associate to the selected interfaces.
7. Select if the network is a tagged or an untagged network.
8. Enter the IP address for the network. You can use the + symbol to add more IP addresses.
9. Define a routing policy to associate with the uplink based on the external network connectivity setup.
● Static Route—A route policy template that contains a network prefix and the next hop IP address.
Deploying and managing a fabric
23