Connectivity Guide

Example
OS10(conf-range-eth1/1/7-1/1/8)# dot1x re-authentication
Supported Releases 10.2.0E or later
dot1x timeout quiet-period
Sets the number of seconds that the device remains in the quiet state following a failed authentication exchange with a supplicant.
Syntax
dot1x timeout quiet-period seconds
Parameters quiet period seconds — Enter the number of seconds for the 802.1X quiet period timeout, from 1 to
65535.
Default 60 seconds
Command Mode INTERFACE
Usage Information The no version of this command resets the value to the default.
Example
OS10(conf-range-eth1/1/7-1/1/8)# dot1x timeout quiet-period 120
Supported Releases 10.2.0E or later
dot1x timeout re-authperiod
Sets the number of seconds between re-authentication attempts.
Syntax
dot1x timeout re-authperiod seconds
Parameters re-authperiod seconds — Enter the number of seconds for the 802.1X re-authentication timeout, from 1 to
65535.
Default 3600 seconds
Command Mode INTERFACE
Usage Information The no version of this command resets the value to the default.
Example
OS10(conf-range-eth1/1/7-1/1/8)# dot1x timeout re-authperiod 7200
Supported Releases 10.2.0E or later
dot1x timeout server-timeout
Sets the number of seconds that the device waits before retransmitting a packet to the authentication server.
Syntax
dot1x timeout server-timeout seconds
Parameters server-timeout seconds — Enter the number of seconds for the 802.1X server timeout, from 1 to 65535.
Default 30 seconds
Command Mode INTERFACE
Usage Information The no version of this command resets the value to the default.
Example
OS10(conf-range-eth1/1/7-1/1/8)# dot1x server-timeout 60
172 Layer 2