Connectivity Guide

Defaults None
Command Mode EXEC
Usage Information To congure an SNMP group, use the snmp-server group command.
Example
OS10# show snmp group
groupname : v2group
version : 2c
notifyview : GetsSets
readview : readview
groupname : v3group
version : 3
security level : priv
notifyview : alltraps
readview : readview
writeview : writeview
Supported Releases 10.4.2.0 or later
show snmp user
Displays the users congured to access the SNMP agent on the switch, including the SNMP group and security model.
Syntax
show snmp user
Parameters None
Defaults None
Command Mode EXEC
Usage Information To congure an SNMP user, use the snmp-server user command.
Example
OS10# show snmp user
User name : privuser
Group : v3group
Version : 3
Authentication Protocol : MD5
Privacy Protocol : AES
Supported Releases 10.4.2.0 or later
show snmp view
Displays the SNMP views congured on the switch, including the SNMP object ID at which the view starts.
Syntax
show snmp view
Parameters None
Defaults None
Command Mode EXEC
Usage Information Use the show snmp view command to verify the OID starting point for SNMP views in MIB trees. To congure
an SNMP view, use the snmp-server view command.
Example
OS10# show snmp view
view name : readview
System management 645