Install Guide

Specications

This section lists the S4112–ON Series (S4112F-ON and S4112T-ON) switch specications.

CAUTION: Operate the product at an ambient temperature not higher than 45°C (113°F).

CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same

or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.

NOTE: For RoHS information, see Restricted Material Compliance.

Topics:

• Chassis physical design

• IEEE standards

• Agency compliance

• USA Federal Communications Commission statement

• European Union EMC directive conformance statement

• Japan VCCI compliance for class A equipment

• Korean certication of compliance

• Safety standards and compliance agency certications

• Electromagnetic compatibility

• Product recycling and disposal

Chassis physical design

Table 8. Chassis physical design

Parameter Specications

Height 1.75 inches (41.25 mm)

Width 8.2 inches (209 mm)

Depth 17.7 inches (450 mm)

Chassis weight with factory-installed components

S4112F-ON: 8.30 lbs, 3.76 kg (2 PSUs and 3 fans)

S4112T-ON: 8.45 lbs, 3.81 kg (2 PSUs and 3 fans)

Rack clearance required

Front: 5 inches (12.7 cm)

Back: 5 inches (12.7 cm)

Table 9. Environmental parameters

Parameter Specications

Operating temperature 5° to 40°C (50° to 104°F)

38 Specications