Install Guide

Parameter Specications
-5°C to 45°C (23°F to 113°F) short term
Short term is </= 1% of operational hours per year.
NOTE: Reduce maximum temperature by 1°C/125 meters
(1°F/228 feet) above 950 meters (3,117 feet).
Operating humidity 5% to 85% (RH), non-condensing
5% to 90% (RH), non-condensing, short term
Short term is </= 1% of operational hours per year.
Storage temperature –40° to 65°C (–40° to 149°F)
Storage humidity 5% to 95%, non-condensing
Maximum thermal output
S4112F-ON: 180W, 614 BTU/hr
S4112T-ON: 200W, 682 BTU/hr
Maximum operational altitude 10,000 feet (3,048 meters)
Maximum non-operational altitude 39,370 feet (12,000 meters)
Shock Dell EMC Spec SV0115
Table 10. AC power requirements
Parameter Specications
Power supply 100–240 VAC 50/60 Hz
Maximum current draw per system 2A/1.7A at 100/120V AC 1A/0.8A at 200/240V AC
Maximum power consumption
S4112F-ON: 180W
S4112T-ON: 200W
Typical power consumption
S4112F-ON: 90W
S4112T-ON: 120W
Table 11. DC power requirements
Parameter Specications
Minimum and maximum input voltage range −40V, –72V DC, 5A Max
Maximum input current −40V/5A, −48V/4.2A, −72V/2.8A
Start up VDC 39.0 ± 1.5 V
Start o VDC 37.5 ±1.5 V
IEEE standards
The S4112–ON Series (S4112F-ON and S4112T-ON) switch complies with the following IEEE standards:
• 802.1ab (LLDP)
Specications
39