Reference Guide

Change to transaction-based conguration

To change to transaction-based conguration mode for a session, enter the start transaction command

1 Change to transaction-based conguration in EXEC mode.

start transaction

2 Enable, for example, an interface from INTERFACE mode.

interface ethernet 1/1/1/

no shutdown

3 Save the conguration.

do commit

NOTE: After you enter the do commit command, the current session switches back to the default behavior of committing

all conguration changes automatically.

Save conguration changes manually

OS10# start transaction

OS10# configure terminal

OS10(config)#

OS10(config)# interface ethernet 1/1/1

OS10(config-if-eth1/1/1)# no shutdown

OS10(config-if-eth1/1/1)# do commit

Copy running conguration

The running conguration contains the current OS10 system conguration and consists of a series of OS10 commands. Copy the running

conguration to a remote server or local directory as a backup or for viewing and editing. The running conguration is copied as a text le,

which you can view and edit with a text editor. To copy the running conguration to the startup conguration le, enter the copy

running-configuration startup-configuration command.

Copy running conguration to local directory or remote server

OS10# copy running-configuration {config://filepath | home://filepath |

ftp://

userid:passwd@hostip/filepath | scp://userid:passwd@hostip/filepath |

sftp://userid:passwd@hostip/filepath | tftp://hostip/filepath}

OS10# copy running-configuration scp://root:calvin@10.11.63.120/tmp/qaz.txt

Copy le to running conguration

To apply a set of commands to the current running conguration and execute them immediately, copy a text le from a remote server or

local directory. The copied commands do not replace the existing commands. If the execution of a copied command fails, the successful

execution of copied commands before the failure is maintained.

OS10# copy {config://filepath | home://filepath |

ftp://userid:passwd@hostip/filepath | scp://userid:passwd@hostip/filepath |

sftp://userid:passwd@hostip/filepath | tftp://hostip/filepath | http://userid@hostip/filepath}

running-configuration

OS10# copy scp://root:calvin@10.11.63.120/tmp/qaz.txt running-configuration

Getting Started