Reference Guide
172.217.160.142
yahoo.com
98.139.180.180
Supported Releases 10.4.0E(R1) or later
show ip vrf
Displays the VRF instance information.
Syntax
show ip vrf [management]
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show ip vrf
VRF-Name Interfaces
default Mgmt1/1/1
Eth1/1/1-1/1/2
Vlan1
management
OS10# show ip vrf management
VRF-Name Interfaces
management
Supported Releases 10.4.0E(R1) or later
Virtual router redundancy protocol
VRRP allows you to form virtual routers from groups of physical routers on your LAN. These virtual routing platforms — master and backup
pairs — provide redundancy in case of hardware failure. VRRP also allows you to easily congure a virtual router as the default gateway to
all your hosts and avoids the single point of failure of a physical router.
VRRP advantages in ease of administration and network throughput and reliability:
• Provides a virtual default routing platform
• Provides load balancing
• Supports multiple logical IP subnets on a single LAN segment
• Enables simple trac routing without the single point of failure of a static default route
• Avoids issues with dynamic routing and discovery protocols
• Takes over a failed default router:
– Within a few seconds
– With a minimum of VRRP trac
– Without any interaction from hosts
Layer 3
415