Reference Guide
information. A MIB is a database that stores managed objects found in network elements. MIBs are hierarchically structured and use object
identiers to address managed objects. Managed objects are also known as object descriptors.
SNMP commands
SNMP traps: Enable SNMP notications to be sent to network management host devices.
snmp-server community
Congures a new community string access. The management station is a member of the same community as the SNMP agent.
Syntax
snmp-server community community-name {ro | rw}
Parameters
• community-name — Enter a text string to act as an SNMP password (up to 20 characters).
• ro — Enter to set read-only permission.
• rw — Enter to set read and write permission.
Default Not congured
Command Mode CONFIGURATION
Usage Information The community-name parameter indexes this command. If you do not congure this command, you cannot
query SNMP data. The no version of this command removes access to a community.
Example
OS10(config)# snmp-server community public ro
Supported Releases 10.2.0E or later
snmp-server contact
Congures contact information for troubleshooting this SNMP node.
Syntax
snmp-server contact text
Parameters text — Enter an alphanumeric text string (up to 55 characters).
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command deletes the SNMP server contact information.
Example
OS10(config)# snmp-server contact administrator
Supported Releases 10.2.0E or later
snmp-server host vrf
Congures a host to receive SNMP traps for the management VRF instance.
Syntax
snmp-server host {hostname | ipv4–address | ipv6–address} vrf management
Parameters hostname | ipv4–address | ipv6–address — Enter either the name or IPv4/IPv6 address of the host.
System management 475