Setup Guide

Specications
This section lists the S4112-ON Series (S4112F-ON and S4112T-ON) switch specications.
CAUTION: Operate the product at an ambient temperature not higher than 45°C
(113°F).
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is
incorrectly replaced. Replace only with same or equivalent type of battery. Dispose
of the batteries according to the manufacturer's instructions.
NOTE: For RoHS information, see Restricted Material Compliance.
Chassis physical design
Table 1. Chassis physical design
Parameter Specications
Height 1.75 inches (41.25 mm)
Width 8.2 inches (209 mm)
Depth 17.7 inches (450 mm)
Chassis weight with factory-installed
components
S4112F-ON: 8.30 lbs, 3.76 kg (2 PSUs and 3
fans)
S4112T-ON: 8.45 lbs, 3.81 kg (2 PSUs and 3
fans)
Rack clearance required
Front: 5 inches (12.7 cm)
Back: 5 inches (12.7 cm)
4
Specications 23