Specifications

INTER_3.3V_volt | 3.200 | Volts | ok | 2.800 | 3.000 | 3.100 | 3.500 | 3.600 |
3.800
FPGA_1.0V_volt | 0.990 | Volts | ok | 0.850 | 0.900 | 0.950 | 1.050 | 1.100 |
1.150
FPGA_1.2V_volt | 1.190 | Volts | ok | 1.020 | 1.080 | 1.140 | 1.260 | 1.320 |
1.380
FPGA_1.8V_volt | 1.780 | Volts | ok | 1.530 | 1.620 | 1.710 | 1.890 | 1.980 |
2.070
FPGA_3.3V_volt | 3.200 | Volts | ok | 2.800 | 3.000 | 3.100 | 3.500 | 3.600 |
3.800
BMC_2.5V_volt | 2.400 | Volts | ok | 2.100 | 2.200 | 2.300 | 2.600 | 2.800 |
2.900
BMC_1.15V_volt | 1.140 | Volts | ok | 0.980 | 1.030 | 1.090 | 1.210 | 1.270 |
1.320
BMC_1.2V_volt | 1.200 | Volts | ok | 1.020 | 1.080 | 1.140 | 1.260 | 1.320 |
1.380
SWITCH_6.8V_volt | 7.000 | Volts | ok | 5.800 | 6.100 | 6.400 | 7.200 | 7.500 |
7.800
SWITCH_3.3V_volt | 3.300 | Volts | ok | 2.800 | 3.000 | 3.100 | 3.500 | 3.600 |
3.800
SWITCH_1.8V_volt | 1.790 | Volts | ok | 1.530 | 1.620 | 1.710 | 1.890 | 1.980 |
2.070
USB_5.0V_volt | 5.000 | Volts | ok | 4.200 | 4.500 | 4.700 | 5.200 | 5.500 |
5.700
NPU_1.2V_volt | 1.190 | Volts | ok | 1.020 | 1.080 | 1.140 | 1.260 | 1.320 |
1.380
NPU_VDDCORE_volt | 0.860 | Volts | ok | 0.700 | 0.720 | 0.740 | 0.910 | 0.930 |
0.950
NPU_VDDANLG_volt | 0.790 | Volts | ok | 0.680 | 0.720 | 0.760 | 0.840 | 0.880 |
0.920
BMC boot | 0x0 | discrete | 0x0180| na | na | na | na | na |
na
SEL_sensor | 0x0 | discrete | 0x2080| na | na | na | na | na |
na
root@dellemc-diag-os:~#
ledtool
The ledtool allows you to control the state of the front and back panel light emitting diodes (LEDs). ASIC and Phys control the port
LEDs and are beyond the scope of this tool.
You can manually control the front and back panel LEDs normally controlled through the CPLD or FPGA access. When set, bits in these
registers control the state of the LED.
Tests
To test the LEDs, use the ledtool --test command.
root@dell-diag-os:/opt/dellemc/diag/bin# ./ledtool --test
LED Test Started... Will take few mins to complete.
LED Tool: Overall test results --------------------- >>> Passed
CLI options
DellEmc Diag - Led Tool
version 1.0, x.xx.x.x-x
build, 2017/05/23,
Usage:
List the LEDs:=
ledtool --list (or)
ledtool -l
Dell EMC DAIG-OS tools
45