Users Guide

Enter new UNIX password: enter a new password
Retype new UNIX password: re-enter the new password
Linux OS10 3.16.7-ckt20 #1 SMP Debian 3.16.7-ckt20-1+deb8u4 (2017-05-01) x86_64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
-* Dell EMC Network Operating System (OS10) *-
-* *-
-* Copyright (c) 1999-2017 by Dell Inc. All Rights Reserved. *-
-* *-
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
This product is protected by U.S. and international copyright and
intellectual property laws. Dell EMC and the Dell EMC logo are
trademarks of Dell Inc. in the United States and/or other
jurisdictions. All other marks and names mentioned herein may be
trademarks of their respective companies.
linuxadmin@OS10:~$
To log in to OS10 and access the command-line interface, enter su — admin at the Linux shell prompt, then admin as the
password.
linuxadmin@OS10:~$ su - admin
Password: admin
OS10#
Frequently asked questions
This section contains answers to frequently asked questions for ONIE-enabled devices.
● Installation contains information about how to enter ONIE: Install mode after a reboot, find information about your specific
switch, how to log into the OS10 shell, and so on.
● Hardware contains information about how to view default console settings, how to view hardware alarms and events, how to
view LED status, and so on.
● Configuration contains information about how to enter CONFIGURATION mode, how to modify the candidate configuration,
and so on.
● Security contains information about how to add users, troubleshoot RADIUS, how to view current DHCP information, and so
on.
● Layer 2 contains information about how to configure routing information including 802.1X, LACP, LLDP, MAC, and so on.
● Layer 3 contains information about how to troubleshoot BCP, ECMP, OSPF, and so on.
● System management contains information about how to view current interface configuration information, how to view a list
of all system devices, how to view the software version, and so on.
● Quality of service contains information about quality of service including classification and marking, congestion management,
policing and shaping, and so on.
● Monitoring contains information about how to view alarms, events, logs, and so on.
Installation
How do I configure a default management route?
Although the default management route was configured during installation, you can use the route add default gw
command from the Linux shell to configure the default management IP address for routing. SupportAssist requires the default
management route is configured to work properly, as well as DNS configured and a route to a proxy server.
How do I log into the OS10 shell as the system administration?
Use linuxadmin as the username and password to enter OS10 at root level.
1592
Troubleshoot Dell EMC SmartFabric OS10