Users Guide

Where can I find additional installation information for my specific device?
See the Setup Guide shipped with your device or the platform-specific Installation Guide on the Dell EMC Support page at
dell.com/support.
Hardware
What are the default console settings for ON-Series devices?
● Set the data rate to 115200 baud
● Set the data format to 8 bits, stop bits to 1, and no parity
● Set flow control to none
How do I view the hardware inventory?
Use the show inventory command to view complete system inventory.
How do I view the process-related information?
Use the show processes node-id node-id-number [pid process-id] command to view the process CPU
utilization information.
Configuration
How do I enter CONFIGURATION mode?
Use the configure terminal command to change from EXEC mode to CONFIGURATION mode.
I made changes to the running configuration file but the updates are not showing. How do I view my changes?
Use the show running-configuration command to view changes that you have made to the running-configuration file.
Here are the differences between the available configuration files:
● startup-configuration contains the configuration applied at device startup
● running-configuration contains the current configuration of the device
● candidate-configuration is an intermediate temporary buffer that stores configuration changes prior to applying them to the
running-configuration
Security
How do I add new users?
Use the username commands to add new users. Use the show users command to view a list of current users.
How do I view RADIUS transactions to troubleshoot problems?
Use the debug radius command.
How do I view the current DHCP binding information?
Use the show ip dhcp binding command.
Layer 2
How do I view the VLAN running configuration?
Use the show vlan command to view all configured VLANs.
Layer 3
How do I view IPv6 interface information?
Use the show ipv6 route summary command.
How do I view summary information for all IP routes?
Troubleshoot Dell EMC SmartFabric OS10
1593