Users Guide

ethernet1/1/5:1 0 0 0 0 7950 7948 0
ethernet1/1/6:1 0 0 0 0 7950 7948 0
ethernet1/1/7:1 0 0 0 0 7950 7948 0
ethernet1/1/8:1 0 0 0 0 7950 7948 0
ethernet1/1/9:1 0 0 0 0 7967 7961 0
ethernet1/1/10:1 0 0 0 0 7967 7961 0
ethernet1/1/11:1 0 0
Supported
Releases
10.2.0E or later
show lacp interface
Displays information about specific LACP interfaces.
Syntax
show lacp interface ethernet node/slot/port
Parameters node/slot/port — Enter the interface information.
Default Not configured
Command Mode EXEC
Usage
Information
The LACP_activity field displays if you configure the link in Active or Passive port channel mode. The Port
Identifier field displays the port priority as part of the information including the port number. For example,
Port Identifier=0x8000,0x101, where the port priority value is 0x8000 and the port number
value is 0x101.
Example
OS10# show lacp interface ethernet 1/1/129
Invalid Port id, Max. Port Id is: 32
OS10# show lacp interface ethernet 1/1/29
Interface ethernet1/1/1 is up
Channel group is 51 port channel is 51
PDUS sent: 27913
PDUS rcvd: 27882
Marker sent: 0
Marker rcvd: 0
Marker response sent: 0
Marker response rcvd: 0
Unknown packetse rcvd: 0
Illegal packetse rcvd: 0
Local Port: 1176 MAC Address=14:18:77:16:87:68
System Identifier=32768,14:18:77:16:87:68
Port Identifier=32768,1176
Operational key=51
LACP_Activity=active
LACP_Timeout=Long Timeout(30s)
Synchronization=IN_SYNC
Collecting=true
Distributing=true
Partner information refresh timeout=Long Timeout(90s)
Actor Admin State=ADEHJLMP
Actor Oper State=ADEGIKNP
Neighbor: 33
MAC Address=f0:ce:10:f0:ce:10
System Identifier=4096,f0:ce:10:f0:ce:10
Port Identifier=32768,33
Operational key=51
LACP_Activity=active
LACP_Timeout=Long Timeout(30s)
Synchronization=IN_SYNC
Collecting=true
Distributing=true
Partner Admin State=BDEGIKMP
Partner Oper State=ADEGIKNP
Layer 2
467