API Guide

Example
OS10# show openflow switch of-switch-1 flows
Logical switch name: of-switch-1
Total flows: 1
Flow: 0
Table ID: 0, Table: Ingress ACL TCAM table
Flow ID: 0
Priority: 32768, Cookie: 0
Hard Timeout: 0, Idle Timeout: 0
Packets: 0, Bytes: 0
Match Parameters:
In Port: ethernet1/1/1
EType: 0x800
SMAC: 00:0b:c4:a8:22:b0/ff:ff:ff:ff:ff:ff
DMAC: 00:0b:c4:a8:22:b1/ff:ff:ff:ff:ff:ff
VLAN id: 2/4095
VLAN PCP: 1
IP DSCP: 4
IP ECN: 1
IP Proto: 1
Src Ip: 10.0.0.1/255.255.255.255
Dst Ip: 20.0.0.1/255.255.255.255
ICMPv4 Type: 1
ICMPv4 Code: 10
L4 Src Port: *
L4 Dst Port: *
Apply-Actions: Output= ethernet1/1/2, ethernet1/1/3:1
Write-Actions: Drop
Supported
Releases
10.4.1.0 or later
show openflow ports
Displays the OpenFlow ports for a specific logical switch instance.
Syntax
show openflow switch logical-switch-name ports
Parameters logical-switch-name—Enter the name of the logical switch instance to view port information.
Default None
Command Mode EXEC
Usage
Information
None
Example
OS10# show openflow switch of-switch-1 ports
Logical switch name: of-switch-1
Interface Name of-port ID Config-State Link-State SPEED DUPLEX
AUTONEG TYPE
ethernet1/1/1 1 PORT_UP(CLI) LINK_UP 40GB FD
YES COPPER
ethernet1/1/2 5 PORT_UP(CLI) LINK_UP 40GB FD
YES COPPER
ethernet1/1/3:1 9 PORT_UP(CLI) LINK_UP 10GB FD
NO FIBER
ethernet1/1/3:2 10 PORT_UP(CLI) LINK_DOWN 0MB FD
NO FIBER
ethernet1/1/3:3 11 PORT_UP(CLI) LINK_DOWN 0MB FD
NO FIBER
ethernet1/1/3:4 12 PORT_UP(CLI) LINK_DOWN 0MB FD
NO FIBER
ethernet1/1/4 13 PORT_UP(CLI) LINK_UP 40GB FD
YES COPPER
ethernet1/1/5:1 17 PORT_UP(CLI) LINK_UP 10GB FD
NO FIBER
OpenFlow 1107