API Guide

d. Select the checkbox to select all the Compute devices in
the current page. If there are multiple pages, then
navigate to each page and select the checkbox.
e. Once all the Compute devices in all the pages are
selected, click "
Update Firmware " menu button.
f. In the popup wizard, select the
individual package and
click
Browse button to select the " iDRAC with Lifecycle
Controller " DUP.
g. Once the DUP is uploaded, click Next and select the
Compliance checkbox. Click Finish to start the update
on all the Compute devices.
h. Allow the job to complete before proceeding to Step 2.
3. Repeat Step 1 instructions to update components " Qlogic
26XX series Fibre Channel adapters ", "Qlogic 27XX series
Fibre Channel adapters", "Qlogic 41xxx series adapters",
"Mellanox ConnectX-4 Lx Ethernet Adapter Firmware",
"Intel NIC Family Version 19.5.x Firmware for X710, XXV710
and XL710 adapters", and "Emulex Picard-16/Picard-32
adapters" as applicable. It is recommended to visit Dell.com
to download the latest device drivers associated with
firmware update.
4. Update component "OpenManage Enterprise Modular" .
a. If OME Modular is managing a "Chassis Group", then
login to OME Modular of the Lead chassis.
b. If the current version is either 1.10.00 or 1.10.10, skip to
Step 4d.
c. If the current version is 1.00.01 or 1.00.10, an update to
the bridge version 1.10.00 or 1.10.10 is required before
updating to 10.10.20. Follow the steps to update to
1.10.10.
NOTE: Updating to 1.1.x may log alert HWC7522 and
require MX7116n or PTM IOMs to be rebooted.
.
i. From the global menu, click Devices and select
Chassis from the dropdown.
ii. This list all the Chassis devices.
iii. Select the checkbox to select all the Chassis in the
current page. If there are multiple pages, then
navigate to each page and select the checkbox.
iv. Once all the Chassis devices in all the pages are
selected, click "
Update Firmware " menu button.
v. In the popup wizard, select the
individual package
and click Browse button to select the "OpenManage
Enterprise Modular" 1.10.10 DUP.
vi. Once the DUP is uploaded, click
Next and select the
top Compliance checkbox. Click Finish to start the
update on all Chassis.
vii. Allow the job to complete.
d. Current version is either 1.10.00 or 1.10.10 .
i. From the global menu, click Devices and select
Chassis from the dropdown.
ii. This list all Chassis devices.
iii. Select the checkbox to select all the Chassis on the
current page. If there are multiple pages, then
navigate to each page and select the checkbox.
iv. Once all the Chassis devices in all the pages are
selected, click "
Update Firmware " menu button.
v. In the popup wizard, select the individual package
and click Browse button to select the "OpenManage
Enterprise Modular" 1.10.20 DUP.
vi. Once the DUP is uploaded, click Next and select the
Compliance checkbox. Click Finish to start the
update on all Chassis.
vii. Allow the job to complete.
5.
Update the "Fabric Switching Engine" and "Ethernet
Switch" components.
52 Getting Started with Dell EMC SmartFabric OS10