API Guide
When you filter routes by IP addresses, if the system does not find a match, it displays the following error
message:
OS10# show ip bgp 40.40.40.0/24
%Error: Prefix does not exist.
Supported
Releases
10.3.0E or later
show ip bgp dampened-paths
Displays BGP routes that are dampened or nonactive.
Syntax
show ip bgp [vrf vrf-name] dampened-paths
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
● vrf vrf-name — (OPTIONAL) Enter vrf and then the name of the VRF to view routes that are
affected by a specific community list corresponding to that VRF.
● Network — Displays the network ID where the route is dampened.
● From — Displays the IP address of the neighbor advertising the dampened route.
● Reuse — Displays the HH:MM:SS until the dampened route is available.
● Path — Lists all AS the dampened route that is passed through to reach the destination network.
Example
OS10# show ip bgp dampened-paths
BGP local router ID is 80.1.1.1
Status codes: s suppressed, S stale, d dampened, h history, * valid, >
best
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Reuse Path
d* 3.1.2.0/24 80.1.1.2 00:00:12 800 9 8 i
d* 3.1.3.0/24 80.1.1.2 00:00:12 800 9 8 i
d* 3.1.4.0/24 80.1.1.2 00:00:12 800 9 8 i
d* 3.1.5.0/24 80.1.1.2 00:00:12 800 9 8 i
d* 3.1.6.0/24 80.1.1.2 00:00:12 800 9 8 i
Total number of prefixes: 5
Supported
Releases
10.3.0E or later
show ip bgp flap-statistics
Displays BGP flap statistics on BGP routes.
Syntax
show ip bgp [vrf vrf-name] flap-statistics
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
● vrf vrf-name — (OPTIONAL) Enter vrf and then the name of the VRF to view flap statistics on
BGP routes corresponding to that VRF.
● Network — Displays the network ID where the route is flapping.
● From — Displays the IP address of the neighbor advertising the flapping route.
● Duration — Displays the HH:MM:SS after the route first flapped.
● Flaps — Displays the number of times the route flapped.
Layer 3 641