API Guide

Enable multicast flood control
Multicast flood control is enabled on OS10 by default. If it is disabled, use the following procedure to enable multicast flood
control:
1. Configure IGMP snooping. To know how to configure IGMP snooping, see the IGMP snooping section.
2. Configure MLD snooping. To know how to configure MLD snooping, see the MLD Snooping section.
3. Enable the multicast flood control feature.
OS10(config)# multicast snooping flood-restrict
Multicast Commands
multicast snooping flood-restrict
Enables multicast snooping flood control for IGMP snooping and MLD snooping.
Syntax
multicast snooping flood-restrict
The no version of this command disables multicast flood control.
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage
Information
Multicast snooping flood control, IGMP snooping, and MLD snooping are enabled by default.
Multicast 779