Connectivity Guide
Command Mode
SYSTEM-QOS
INTERFACE
Usage Information Use the show qos maps type [tc-queue | trust-map-dot1p | trust-map-dscp] [string]
command to view the current trust mapping. You must change the trust map only during no trac ow. Verify the
correct policy maps are applied. The no version of this command returns the value to the default.
Example
OS10(config)# interface ethernet 1/1/1
OS10(conf-if-eth1/1/1)# trust-map dscp dscp-trustmap1
Supported Releases 10.4.1.0 or later
wred
Congures a weighted random early detection (WRED) prole.
Syntax
wred wred-profile-name
Parameters wred-profile-name — Enter a name for the WRED prole.
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command removes the WRED prole.
Example
OS10(config)# wred test_wred
OS10(config-wred)#
Supported Releases 10.4.0E(R1) or later
Quality of service 1033