Connectivity Guide
source interface
Congures the source interface used to stream telemetry data to a destination device.
Syntax
source interface interface
Parameters interface — One of the following values:
• ethernet node/slot/port[:subport] — Enter a physical Ethernet interface.
• loopback number — Enter a Loopback interface, from 0 to 16383.
• management 1/1/1 — Enter the management interface.
• port-channel channel-id — Enter a port-channel ID, from 1 to 28.
• vlan vlan-id — Enter a VLAN ID, from 1 to 4093.
Default None
Command mode SUBSCRIPTION-PROFILE
Usage information The telemetry agent uses the source interface to derive the VRF instance and IP address used to communicate
with destination devices. For gRPC transport, source interface conguration is optional. The no version of the
command removes the congured source interface from a subscription prole.
Example
OS10(conf-telemetry)# subscription-profile subscription-1
OS10(conf-telemetry-sp-subscription-1)# source-interface ethernet 1/1/1
Supported releases 10.4.3.0 or later
subscription-prole
Congures a subscription prole for streaming telemetry data.
Syntax
subscription-profile profile-name
Parameters profile-name — Enter a prole name. A maximum of 32 characters.
Default Not congured
Command mode TELEMETRY
Usage information A subscription prole associates destination groups with sensor groups, and species the data encoding format
and transport protocol. Telemetry data is sent to the IP address and port specied in the destination groups.
Example
OS10(conf-telemetry)# subscription-profile subscription-1
OS10(conf-telemetry-sp-subscription-1)#
Supported releases 10.4.3.0 or later
telemetry
Enters Telemetry conguration mode to congure streaming telemetry.
Syntax
telemetry
Parameters None
Telemetry 1141