Connectivity Guide

Supported Releases 10.2.0E or later
netbios-name-server address
Congures a NetBIOS WINS server which is available to DHCP clients.
Syntax
netbios-name-server ip-address [address2...address8]
Parameters
ip-address — Enter the address of the NetBIOS WINS server.
address2...address8 — (Optional) Enter additional server addresses.
Default Not congured
Command Mode DHCP-POOL
Usage Information Congure up to eight NetBIOS WINS servers available to a Microsoft DHCP client, in order of preference. The no
version of this command returns the value to the default.
Example
OS10(conf-dhcp-Dell)# netbios-name-server 192.168.10.5
Supported Releases 10.2.0E or later
netbios-node-type
Congures the NetBIOS node type for the DHCP client.
Syntax
netbios-node-type type
Parameters type — Enter the NetBIOS node type:
• Broadcast — Enter b-node.
• Hybrid — Enter h-node.
• Mixed — Enter m-node.
• Peer-to-peer — Enter p-node.
Default Hybrid
Command Mode DHCP-POOL
Usage Information The no version of this command resets the value to the default.
Example
OS10(conf-dhcp-Dell)# netbios-node-type h-node
Supported Releases 10.2.0E or later
network
Congures a range of IPv4 or IPv6 addresses in the address pool.
Syntax
network address/mask
Parameters address/mask — Enter a range of IP addresses and subnet mask in A.B.C.D/x or A::B/x format.
Default Not congured
142 System management