Connectivity Guide

Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use this command to view the DHCP binding table.
Example
OS10# show ip dhcp binding
IP Address Hardware address Lease expiration Hostname
+-----------------------------------------------------
11.1.1.254 00:00:12:12:12:12 Jan 27 2016 06:23:45
Total Number of Entries in the Table = 1
Supported Releases 10.2.0E or later
DNS commands
OS10 supports the conguration of a DNS host and domain parameters.
ip domain-list
Adds a domain name to the DNS list. This domain name appends to incomplete hostnames in DNS requests.
Syntax
ip domain-list [vrf vrf-name] [server-name] name
Parameters
• vrf vrf-name — (Optional) Enter vrf and then the name of the VRF to add a domain name to the DNS
list corresponding to that VRF.
• server-name — (Optional) Enter the server name to add a domain name to the DNS list.
• name — Enter the name of the domain to append to the DNS list.
Default Not congured
Command Mode CONFIGURATION
Usage Information There is a maximum of six domain names to the DNS list. Use this domain name to complete unqualied host
names. The no version of this command removes a domain name from the DNS list.
Example
OS10(config)# ip domain-list jay dell.com
Supported Releases 10.2.0E or later
ip domain-name
Congures the default domain and appends to incomplete DNS requests.
Syntax
ip domain-name [vrf vrf-name] server-name
Parameters
• vrf vrf-name — (Optional) Enter vrf and then the name of the VRF to congure the domain
corresponding to that VRF.
• server-name — (Optional) Enter the server name the default domain uses.
Default Not congured
144 System management