Connectivity Guide
Conguration guidelines
When conguring dierent modes; for example, F_Port, NPG, or FSB, consider the following:
• F_Port, NPG, and FSB modes are mutually exclusive. You can enable only one at a time.
• You can enable the mode-specic commands only after enabling the specic feature.
• Before you disable the F_Port and NPG features, delete the mode-specic congurations. When you disable FSB, the system
automatically removes the congurations.
F_Port commands
The following commands are supported on F_Port mode:
fc alias
Creates an FC alias. After creating the alias, add members to the FC alias. An FC alias can have a maximum of 255 unique members.
Syntax
fc alias alias-name
Parameters alias-name — Enter a name for the FC alias.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information
The no version of this command deletes the FC alias. To delete an FC alias, rst remove it from the FC zone.
Example
OS10(config)# fc alias test
OS10(config-fc-alias-test)# member wwn 21:00:00:24:ff:7b:f5:c9
OS10(config-fc-alias-test)# member wwn 20:25:78:2b:cb:6f:65:57
Supported Releases 10.3.1E or later
fc zone
Creates an FC zone and adds members to the zone. An FC zone can have a maximum of 255 unique members.
Syntax
fc zone zone-name
Parameters zone-name — Enter a name for the zone.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information
The no version of this command deletes the FC zone. To delete an FC zone, rst remove it from the FC zoneset.
Example
OS10(config)# fc zone hba1
OS10(config-fc-zone-hba1)# member wwn 10:00:00:90:fa:b8:22:19
OS10(config-fc-zone-hba1)# member wwn 21:00:00:24:ff:7b:f5:c8
Supported Releases 10.3.1E or later
232 Fibre Channel