Connectivity Guide

show fcoe fcf
Displays details of the FCFs connected to the switch.
Syntax
show fcoe [fcf-mac-address]
Parameters fcf-mac-address — (Optional) Enter the MAC address of the FCF. This option displays details of the specied
FCF.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show fcoe fcf
FCF MAC FCF Interface VLAN FC-MAP FKA_ADV_PERIOD No. of
Enodes FCF Mode
-------- ------------- ------ ------- --------------
------------- --------
00:0c:84:a8:00:00 Eth 1/1/36 777 0e:fc:00 8000
0 F
00:0d:84:a8:01:02 Eth 1/1/37 778 0e:fc:01 8000
0 FT
Supported Releases 10.4.0E(R1) or later
show fcoe pinned-port
Displays the port-channel, the corresponding pinned-port conguration, and the port status if the FCoE sessions are formed.
Syntax
show fcoe pinned-port [port-channel port-channel-id]
Parameters port-channel-id—Enter the port-channel ID to display the corresponding conguration.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show fcoe pinned-port
Interface pinned-port FCoE Status
----------------- ---------------- -----------------
Po 10 Eth 1/1/1 Up
Po 20 Eth 1/1/3 Up
Po 30 Eth 1/1/7 Down
Supported Releases 10.4.2.0 or later
250 Fibre Channel