Connectivity Guide
Usage Information Congure an arbitrary value in the IP address format for each router. Each router ID must be unique. Use the xed
router ID for the active OSPFv3 router process. Changing the router ID brings down the existing OSPFv3
adjacency. The new router ID becomes eective immediatley. The no version of this command disables the router
ID conguration.
Example
OS10(config)# router ospfv3 10
OS10(config-router-ospfv3-100)# router-id 10.10.1.5
Supported Releases 10.3.0E or later
router ospfv3
Enters Router OSPFv3 mode and congures an OSPFv3 instance.
Syntax
router ospfv3 instance-number [vrf vrf-name]
Parameters
• instance-number—Enter a router OSPFv3 instance number, from 1 to 65535.
• vrf vrf-name — Enter the keyword vrf followed by the name of the VRF to congure an OSPFv3
instance in that VRF.
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command deletes an OSPFv3 instance.
Example
OS10(config)# router ospfv3 10 vrf vrf-test
Supported Releases 10.3.0E or later
show ipv6 ospf
Displays OSPFv3 instance conguration information.
Syntax
show ipv6 ospf [instance-number]
Parameters instance-number — (Optional) View OSPFv3 information for a specied instance number, from 1 to 65535.
Default None
Command Mode EXEC
Usage Information None
Example
OS10# show ipv6 ospf
Routing Process ospfv3 200 with ID 1.1.1.1
It is an Area Border Router
Min LSA origination 5000 msec, Min LSA arrival 1000 msec
Min LSA hold time 0 msec, Max LSA wait time 0 msec
Number of area in this router is 2, normal 2 stub 0 nssa
Area (0.0.0.0)
Number of interface in this area is 1
SPF algorithm executed 42 times
Area (0.0.0.1)
Number of interface in this area is 1
SPF algorithm executed 42 times
OS10# show ipv6 ospf 200
Routing Process ospfv3 200 with ID 10.0.0.2
Min LSA origination 5000 msec, Min LSA arrival 1000 msec
Min LSA hold time 0 msec, Max LSA wait time 0 msec
Number of area in this router is 1, normal 1 stub 0 nssa
Area (0.0.0.0)
Layer 3 583