Connectivity Guide
control-plane
Enters CONTROL-PLANE mode.
Syntax
control-plane
Parameters None
Default Not congured
Command Mode CONTROL-PLANE
Usage Information If you attach an access-list to the class-map type of control-plane, the access-list ignores the permit and
deny keywords.
Example (class-map)
OS10(config)# class-map type control-plane match-any c1
OS10(conf-cmap-control-plane)#
Example (policy-
map)
OS10(config)# policy-map type control-plane p1
OS10(conf-pmap-control-plane)#
Supported Releases 10.2.0E or later
control-plane-buer-size
Congures the buer size for the CPU pool.
Syntax
control-plane-buffer-size size-of-buffer-pool
Parameters size-of-buffer-pool—Enter the buer size in KB, from 620 KB to 900 KB.
Default None
Command Mode SYSTEM-QOS
Usage Information This command congures the buer size of the CPU pool. The system allocates a buer size for the CPU pool
from the total system buer. A minimum guaranteed buer is allocated for each of the CPU queues and the rest is
available for shared usage. The size of the buer pool varies based on the number of CPU queues and buer usage
by each queue, but it cannot be less than the aggregate of the minimum guaranteed buer allocated for each of
the CPU queues. The no version of this command removes the buer size congured for the CPU pool and
returns the buer size to the default value, 620 KB.
Example
OS10(config-sys-qos)# control-plane-buffer-size 900
Supported Releases 10.4.2.0 and later
owcontrol
Enables or disables link-level ow control on an interface.
Syntax
flowcontrol [receive | transmit] [on | off]
Parameters
• receive — (Optional) Indicates the port can receive ow control packets from a remote device.
Quality of service 999