Reference Guide

member (zone)
Adds members to existing zones. Identify a member by an FC alias, a World Wide Name (WWN), or an FC ID.
Syntax
member {alias-name alias-name | wwn wwn-ID | fc-id fc-id}
Parameters
• alias-name — Enter the FC alias name.
• wwn-ID — Enter the WWN name.
• fc-id — Enter the FC ID name.
Defaults Not congured
Command Mode Zone CONFIGURATION
Usage Information
The no version of this command removes the member from the zone.
Example
OS10(config)# fc zone hba1
OS10(config-fc-zone-hba1)# member wwn 10:00:00:90:fa:b8:22:19
OS10(config-fc-zone-hba1)# member wwn 21:00:00:24:ff:7b:f5:c8
Supported Releases 10.3.1E or later
member (zoneset)
Adds zones to an existing zoneset.
Syntax
member zone-name
Parameters zone-name — Enter an existing zone name.
Defaults Not congured
Command Mode Zoneset CONFIGURATION
Usage Information
The no version of this command removes the zone from the zoneset.
Example
OS10(config)# fc zoneset set
OS10(conf-fc-zoneset-set)# member hba1
Supported Releases 10.3.1E or later
name
Congures a vfabric name.
Syntax
name vfabric-name
Parameters vfabric-name — Enter a name for the vfabric.
Defaults Not congured
Command Mode Vfabric CONFIGURATION
Fibre channel 131