Reference Guide

show dot1x interface
Displays 802.1X conguration information.
Syntax
show dot1x interface ethernet node/slot/port[:subport]
Parameters ethernet node/slot/port[:subport] — Enter the Ethernet interface information.
Command Mode EXEC
Usage Information Use this command to view the dot1x interface conguration for a specic interface.
Example
OS10# show dot1x interface
802.1x information on ethernet1/1/1
-------------------------------------
Dot1x Status: Enable
802.1x information on ethernet1/1/2
-------------------------------------
Dot1x Status: Enable
802.1x information on ethernet1/1/3
-------------------------------------
Dot1x Status: Enable
802.1x information on ethernet1/1/4
-------------------------------------
Dot1x Status: Enable
802.1x information on ethernet1/1/5
-------------------------------------
Dot1x Status: Enable
802.1x information on ethernet1/1/6
-------------------------------------
Dot1x Status: Enable
802.1x information on ethernet1/1/7
-------------------------------------
Dot1x Status: Enable
Port Control: AUTO
Port Auth Status: UNAUTHORIZED
--more--
Example (when
dot1x is not enabled
globally)
OS10# show dot1x interface
802.1x not enabled in the system
OS10#
Example (Ethernet)
OS10# show dot1x interface ethernet 1/1/7
802.1x information on ethernet1/1/7
-------------------------------------
Dot1x Status: Enable
Port Control: AUTO
Re-Authentication: Enable
Tx Period: 120 seconds
Quiet Period: 120 seconds
Supplicant Timeout: 45 seconds
Server Timeout: 60 seconds
Re-Auth Interval: 3600 seconds
Max-EAP-Req: 4
Host Mode: MULTI_AUTH
Port status and State info for Supplicant: 01:80:c2:00:01:1c
Port Auth Status: UNAUTHORIZED
Untagged VLAN id: 1
Auth PAE State: Initialize
Backend State: Idle
Supported Releases 10.2.0E or later
Layer 2 155