Reference Guide
password-attributes
Congures rules for password entries.
Syntax
password-attributes {[min-length number] [character-restriction {[upper number]
[lower number] [numeric number] [special-char number]}}
Parameters
• min-length number — (Optional) Sets the minimum number of required alphanumeric characters (6 to
32; default 9).
• character-restriction:
– upper number — (Optional) Sets the minimum number of uppercase characters required (0 to 31;
default 0).
–
lower number — (Optional) Sets the minimum number of lowercase characters required (0 to 31;
default 0)
– numeric number — (Optional) Sets the minimum number of numeric characters required (0 to 31;
default 0)
– special-char number — (Optional) Sets the minimum number of special characters required (0 to 31;
default 0).
Default
• Minimum length: 9 characters
• Uppercase characters: 0
• Lowercase characters: 0
• Numeric characters: 0
• Special characters: 0
Command Mode EXEC
Usage Information
• By default, the password you congure with the username password command must be at least nine
alphanumeric characters.
• Use the password-attributes command to increase password strength. When you enter the command,
at least one parameter is required. When you enter the
character-restriction parameter, at least one
option is required.
Example
OS10(config)# password-attributes min-length 6 character-restriction upper 2
lower 2 numeric 2
Supported Releases 10.4.0E(R1) or later
radius-server host
Congures a RADIUS authentication server.
Syntax
radius-server host {hostname | ip-address} [auth-port port-number | key
authentication-key]
Parameters
• hostname — Enter the host name of the RADIUS server.
• ip-address — Enter the IPv4 (A.B.C.D) or IPv6 (x:x:x:x::x) address of the RADIUS server.
• auth-port port-number — (Optional) Enter the UDP port number used on the server for authentication
(0 to 65535, default 1812)
System management 469