Reference Guide

radius-server vrf
Congures RADIUS server for the management VRF instance.
Syntax
radius-server vrf management
Parameters None
Defaults Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command removes the RADIUS server from the management VRF instance.
Example
OS10(config)# radius-server vrf management
Supported Releases 10.4.0E(R1) or later
show ip ssh
Displays the SSH server information.
Syntax
show ip ssh
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use this command to view information about the established SSH sessions.
Example
OS10# show ip ssh
SSH Server: Enabled
--------------------------------------------------
SSH Server Ciphers: [e-mail],aes128-ctr,
aes192-ctr,aes256-ctr,
[e-mail],[e-mail]
SSH Server MACs: [e-mail],[e-mail],
[e-mail],hmac-sha2-512-
[e-mail],
[e-mail],[e-mail],
[e-mail],hmac-sha2-256,
hmac-sha2-512,hmac-sha1
SSH Server KEX algorithms: [e-mail],ecdh-sha2-nistp256,
ecdh-sha2-nistp384,ecdh-sha2-nistp521,
diffie-hellman-group-exchange-sha256,diffie-
hellman-group14-sha1
Password Authentication: Enabled
Host-Based Authentication: Disabled
RSA Authentication: Enabled
Challenge Response Auth: Disabled
Supported Releases 10.3.0E or later
System management 471