Reference Guide
• standby — Set the standby partition as the next boot partition.
Default Active
Command Mode EXEC
Usage Information Use this command to congure the location of the OS10 image used to reload the software at boot time. Use the
show boot command to view the congured next boot image. This command is applied immediately and does not
require the commit command.
Example
OS10# boot system standby
Supported Releases 10.2.0E or later
image cancel
Cancels an active image download.
Syntax
image cancel
Parameters None
Default Not congured
Command Mode EXEC
Usage Information This command attempts to cancel an active le download in progress.
Example
OS10# image cancel
Supported Releases 10.2.0E or later
image copy
Copies the entire image in the active partition to the standby partition (mirror image).
Syntax
image copy active-to-standby
Parameters active-to-standby — Enter to copy the entire image in the active partition to the standby partition (mirror
image).
Default Not congured
Command Mode EXEC
Usage Information Duplicate the active, running software image to the standby image location.
Example
OS10# image copy active-to-standby
Supported Releases 10.2.0E or later
image download
Downloads a new software image to the local le system.
Syntax
image download file-url
Parameters file-url — Set the path to the image le:
478 System management