Reference Guide
Default Not congured
Command Mode INTERFACE
Usage Information The no version of this command removes the WRED prole from the interface.
Example
OS10(config)# interface ethernet 1/1/1
OS10(conf-if-eth1/1/1)# random-detect test_wred
Supported Releases 10.4.0E(R1) or later
random-detect (queue)
Assigns a WRED prole to the specied queue.
Syntax
random-detect wred-profile-name
Parameters wred-profile-name — Enter the name of an existing WRED prole.
Default Not congured
Command Mode PMAP-C-QUE
Usage Information The no version of this command removes the WRED prole from the queue.
Example
OS10(config)# policy-map type queuing p1
OS10(config-pmap-queuing)# class c1
OS10(config-pmap-c-que)# random-detect test_wred
Supported Releases 10.4.0E(R1) or later
random-detect color
Congures the threshold of WRED prole for available colors.
Syntax
random-detect color color-name minimum-threshold minimum-value maximum-
threshold maximum-value drop-probability drop-rate
Parameters
• color-name — Enter the color of drop precedence for the WRED prole. The available options are: green,
yellow, and red.
• minimum-value — Enter the minimum threshold value for the specied color (1 to 12480).
• maximum-value — Enter the maximum threshold value for the specied color (1 to 12480).
• drop-rate — Enter the rate of drop precedence in percentage (0 to 100).
Default Not congured
Command Mode WRED CONFIGURATION
Usage Information The no version of this command removes the WRED prole.
Example
OS10(config)# wred test_wred
OS10(config-wred)# random-detect color green minimum-threshold 100 maximum-
threshold 300 drop-probability 40
Supported Releases 10.4.0E(R1) or later
Quality of service 583