Reference Guide

Supported Releases 10.2.0E or later
start
Activates the transaction-based conguration mode for the active session.
Syntax
start transaction
Parameters transaction - Enables transaction-based conguration.
Default Not congured
Command Mode EXEC
Usage Information Use this command to save changes to the candidate conguration before applying conguration changes to the
running conguration.
Example
OS10# start transaction
Supported Releases 10.3.1E or later
system
Executes a Linux command from within OS10.
Syntax
system command
Parameters command — Enter the Linux command to execute.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# system bash
admin@OS10:~$ pwd
/config/home/admin
admin@OS10:~$ exit
OS10#
Supported Releases 10.2.0E or later
system identier
Sets a non-default unit ID in a non-stacking conguration.
Syntax
system identifier system-identifier-ID
Parameters system-identifier-ID — Enter the system identier ID (1–9)
Default Not congured
Command Mode CONFIGURATION
Usage Information The system ID is displayed in the stack LED on the front panel.
68 Getting Started