Reference Guide

Parameters
interface-type — (Optional) Enter the interface type. The interface may be
ethernet, VLAN, or port-channel.
Default Not congured
Command Mode EXEC
Usage Information If you do not specify the interface interface-type information, then the command clears the statistics
for all the interfaces and VLANs.
Example
OS10# clear fcoe statistics interface ethernet 1/1/1
OS10# clear fcoe statistics interface port-channel 5
Supported Releases 10.4.0E(R1) or later
fc alias
Creates an FC alias. After creating the alias, you can add members to the FC alias.
Syntax
fc alias alias-name
Parameters alias-name — Enter a name for the FC alias.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information
The no version of this command deletes the FC alias. To delete an FC alias, rst remove it from the FC zone.
Example
OS10(config)# fc alias test
OS10(config-fc-alias-test)# member wwn 21:00:00:24:ff:7b:f5:c9
OS10(config-fc-alias-test)# member wwn 20:25:78:2b:cb:6f:65:57
Supported Releases 10.3.1E or later
fc zone
Creates an FC zone and adds members to the zone. An FC zone can have a maximum of 527 unique members.
Syntax
fc zone zone-name
Parameters zone-name — Enter a name for the zone.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information
The no version of this command deletes the FC zone. To delete an FC zone, rst remove it from the FC zoneset.
Example
OS10(config)# fc zone hba1
OS10(config-fc-zone-hba1)# member wwn 10:00:00:90:fa:b8:22:19
OS10(config-fc-zone-hba1)# member wwn 21:00:00:24:ff:7b:f5:c8
Supported Releases 10.3.1E or later
Fibre channel 127