Reference Guide
Command Mode CONFIG-ROUTER-BGP
Usage Information Members of a peer-group template inherit the conguration properties of the template and share the same update
policy. The no version of this command removes a peer-template conguration.
Example
OS10(conf-router-bgp-10)# template solar
OS10(conf-router-bgp-template)#
Supported Releases 10.3.0E or later
timers
Adjusts BGP keepalive and holdtime timers.
Syntax
timers keepalive holdtime
Parameters
• keepalive—Enter the time interval (in seconds) between keepalive messages sent to the neighbor routers,
from 1 to 65535.
• holdtime—Enter the time interval (in seconds) between the last keepalive message and declaring a router
dead, from 3 to 65535.
Default keepalive 60 seconds; holdtime 180 seconds
Command Mode ROUTER-BGP
Usage Information The congured timer value becomes eective after a BGP hard reset. The timer values negotiate from peers. The
no version of this command resets the value to the default.
Example
OS10(conf-router-bgp)# timers 30 90
Supported Releases 10.3.0E or later
weight
Assigns a default weight for routes from the neighbor interfaces.
Syntax
weight number
Parameters number—Enter a number as the weight for routes, from 1 to 4294967295.
Default 0
Command Mode ROUTER-BGP-NEIGHBOR
Usage Information The path with the highest weight value is preferred in the best-path selection process. The no version of this
command resets the value to the default.
Example
OS10(conf-router-bgp-neighbor)# weight 4096
Supported Releases 10.3.0E or later
Layer 3 307