Reference Guide
interface breakout 1/1/18 map 40g-1x
interface breakout 1/1/19 map 40g-1x
interface breakout 1/1/20 map 40g-1x
interface breakout 1/1/21 map 40g-1x
interface breakout 1/1/22 map 40g-1x
interface breakout 1/1/23 map 40g-1x
interface breakout 1/1/24 map 40g-1x
interface breakout 1/1/25 map 40g-1x
interface breakout 1/1/26 map 40g-1x
interface breakout 1/1/27 map 40g-1x
interface breakout 1/1/28 map 40g-1x
interface breakout 1/1/29 map 40g-1x
interface breakout 1/1/30 map 40g-1x
interface breakout 1/1/31 map 40g-1x
interface breakout 1/1/32 map 40g-1x
ipv6 forwarding enable
username admin password $6$q9QBeYjZ$jfxzVqGhkxX3smxJSH9DDz7/3OJc6m5wjF8nnLD7/VKx8SloIhp4NoGZs0I/
UNwh8WVuxwfd9q4pWIgNs5BKH. role sysadmin
aaa authentication local
snmp-server contact http://www.dell.com/support
!
interface range ethernet 1/1/1-1/1/32
switchport access vlan 1
no shutdown
!
interface vlan 1
no shutdown
!
interface mgmt1/1/1
ip address dhcp
no shutdown
ipv6 enable
ipv6 address autoconfig
!
support-assist
!
policy-map type application policy-iscsi
!
class-map type application class-iscsi
!
class-map type qos class-trust
Show dierence between candidate and running congurations
OS10# show diff candidate-configuration running-configuration
OS10#
NOTE
: If the OS10# prompt does not return output, the candidate-configuration and running-configuration les
match.
Prevent conguration changes
You can prevent conguration changes on sessions other than the current CLI session using the lock command. Use the lock and
unlock commands in EXEC mode to respectively prevent and allow conguration changes on other sessions. When you enter the lock
command on a CLI session, users cannot make conguration changes across any other active CLI sessions. When you close the CLI session
on which you entered the lock command, conguration changes are automatically allowed on all other sessions.
Lock conguration changes
OS10# lock
Unlock conguration changes
OS10# unlock
36
Getting Started