Reference Guide
show users
Displays information for all users logged into OS10.
Syntax
show users
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use this command to view current OS10 users.
Example
OS10# show users
Index Line User Role Application Idle Location Login-Time Lock
-------------------------------------------------------------------
1 ttyS0 admin sysadmin login/clish . - 2016-04-29 01:02:00
Supported Releases 10.2.0E or later
tacacs-server host
Congures a TACACS+ server for user authentication.
Syntax
tacacs-server host {hostname | ip-address} key authentication-key [auth-port
port-number]
Parameters
• hostname — Enter the host name of the TACACS+ server.
• ip-address — Enter the IPv4 (A.B.C.D) or IPv6 (x:x:x:x::x) address of the TACACS+ server.
• key authentication-key — Enter a text string for the encryption key used to authenticate the switch
on the TACACS+ server (up to 42 characters).
• auth-port port-number — (Optional) Enter the TCP port used on the TACACS+ server (1 to 65535,
default 49)
Default Not congured
Command Mode CONFIGURATION
Usage Information The authentication key must match the key congured on the TACACS+ server. Congure the global timeout
allowed for authentication requests on TACACS+ servers by using the tacacs-server timeout command. By
default, OS10 times out an authentication attempt on a TACACS+ server after ve seconds. The no version of this
command removes a TACACS+ server conguration.
Example
OS10(config)# tacacs-server host 1.5.6.4 key secret1
Supported Releases 10.4.0E(R2) or later
tacacs-server timeout
Congures the global timeout used for authentication attempts on TACACS+ servers.
Syntax
tacacs-server timeout seconds
System management 473