Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4128F-ON/S4128T-ON
141142143144145146147148149150
Table Of Contents
MessageID :
Description : Unable to validate the SmartFabric because
the VLTi cable for link ICL-2_REVERSE is not connected as per
fabric design 2xMX5108n_Ethernet_Switches_in_same_chassis.
EEMI : NFAB0012
Category : FABRIC_ERROR
Subcategory : ISL_ERROR
Severity : SEVERITY_1
Recommended Action:Make sure that the VLTi cables are connected
to the correct ports as per the selected fabric design.
Timestamp : 1587490907
Problem Link
SourceNode :HRA0038
SourceInterface :HRA0038:ethernet1/1/9
DestinatioNode :HRA0037
DestinationInterface:
Recommended Link
SourceNode :HRA0038
SourceInterface :HRA0038:ethernet1/1/9
DestinatioNode :HRA0037
DestinationInterface:HRA0037:ethernet1/1/9
----------------------------------------------------------
Supported
Releases
10.5.0.1 or later
show smartfabric discovered-server
Displays all discovered server information such as ID, model, slot, chassis model, and chassis service tag.
Syntax
show smartfabric discovered-server
Parameters None
Default None
Command Mode EXEC
Usage
Information
Use this command to view the discovered server information when used. This command is supported in
both Full Switch and SmartFabric modes.
Example
MX5108N-B1# show smartfabric discovered-server
----------------------------------------------------------
Server-Id : 004YX20
Server-Model : PowerEdge MX740c
Server-Slot : 1
Chassis-Model : POWEREDGE MX7000
Chassis-Service-Tag : SKY002R
----------------------------------------------------------
----------------------------------------------------------
Server-Id : 0002X20
Server-Model : PowerEdge MX740c
Server-Slot : 1
Chassis-Model : POWEREDGE MX7000
Chassis-Service-Tag : SKY0044
----------------------------------------------------------
Supported
Releases
10.5.1.0 or later
show smartfabric discovered-server discovered-server-interface
Displays all discovered server interfaces information such as the port ID and switch interfaces on which the server is onboarded
for each discovered server.
Syntax
show smartfabric discovered-server discovered-server-interface server-id
142 SmartFabric Services