Users Guide

111.1.1.0 1 0.0.0.0 vlan3051 0.0.0.0 intra-area
111.2.1.0 1 0.0.0.0 vlan3053 0.0.0.0 intra-area
Supported
Releases
10.2.0E or later
show ip ospf statistics
Displays OSPF traffic statistics.
Syntax
● show ip ospf [instance-number] [vrf vrf-name] statistics [interface
interface]
Parameters
● instance-number — (Optional) Enter an OSPF instance number, from 1 to 65535.
● vrf vrf-name — (Optional) Enter the keyword vrf followed by the name of the VRF to display
OSPF traffic statistics corresponding to that VRF.
● interface interface — (Optional) Enter the interface information:
○ ethernet node/slot/port[:subport] — Enter an Ethernet port interface.
○ port-channel number — Enter the port-channel interface number, from 1 to 128.
○ vlan vlan-id — Enter the VLAN ID number, from 1 to 4093.
Default Not configured
Command Mode EXEC
Usage
Information
This command displays OSPFv2 traffic statistics for a specified instance or interface, or for all OSPFv2
instances and interfaces.
Example
OS10# show ip ospf 10 statistics
Interface vlan3050
Receive Statistics
rx-invalid 0 rx-invalid-bytes 0
rx-hello 0 rx-hello-bytes 0
rx-db-des 0 rx-db-des-bytes 0
rx-ls-req 0 rx-ls-req-bytes 0
rx-ls-upd 0 rx-ls-upd-bytes 0
rx-ls-ack 0 rx-ls-ack-bytes 0
Transmit Statistics
tx-failed 0 tx-failed-bytes 0
tx-hello 0 tx-hello-bytes 0
tx-db-des 0 tx-db-des-bytes 0
tx-ls-req 0 tx-ls-req-bytes 0
tx-ls-upd 0 tx-ls-upd-bytes 0
tx-ls-ack 0 tx-ls-ack-bytes 0
Error packets (Receive statistics)
bad-src 0 dupe-id 0 hello-err
0
mtu-mismatch 0 nbr-ignored 0 wrong-proto
0
resource-err 0 bad-lsa-len 0 lsa-bad-type
0
lsa-bad-len 0 lsa-bad-cksum 0 auth-fail
0
netmask-mismatch 0 hello-tmr-mismatch 0 dead-ivl-mismatch
0
options-mismatch 0 nbr-admin-down 0 own-hello-drop
0
self-orig 0 wrong-length 0 checksum-error
0
version-mismatch 0 area-mismatch 0
Supported
Releases
10.2.0E or later
716 Layer 3