Reference Guide

link-bundle-utilization
Congures link-bundle utilization.
Syntax
link-bundle-utilization trigger-threshold value
Parameters value — Enter the percentage of port-channel bandwidth that triggers trac monitoring on port-channel
members (0 to 100).
Default Disabled
Command Mode CONFIGURATION
Usage Information None
Example
OS10(config)# link-bundle-utilization trigger-threshold 10
Supported Releases 10.2.0E or later
mode
Congures a front-panel unied port group to operate in Fibre Channel or Ethernet mode, or a QSFP28-DD port to operate in Ethernet
mode, with the specied speed on activated interfaces.
Syntax
mode {Eth {100g-2x | 100g-1x | 40g-2x | 40g-1x | 25g-8x [fabric-expander-mode]
| 25g-4x | 10g-8x | 10g-4x} | FC {32g-2x | 32g-1x | 16g-4x | 16g-2x |8g-4x}}
Parameters
• mode Eth — Congure a port group in Ethernet mode and set the speed to:
– 100g-2x — Split a QSFP28-DD port into two 100GE interfaces.
– 100g-1x — Reset a QSFP28 port group to 100GE mode.
– 40g-2x — Split a port group into two 40GE interfaces.
– 40g-1x — Set a port group to 40G mode for use with a QSFP+ 40GE transceiver.
– 25g-8x fabric-expander-mode — Split a QSFP28-DD port into eight 25GE interfaces for
connection to a Fabric Expander.
– 25g-8x — Split a port group into eight 25GE interfaces.
– 25g-4x — Split a port group into four 25GE interfaces.
– 10g-8x — Split a port group into eight 10GE interfaces.
– 10g-4x — Split a port group into four 10GE interfaces.
• mode FC — Congure a port group in Fibre Channel mode and set the speed to:
– 32g-2x — Split a port group into two 32GFC interfaces, subports 1 and 3.
– 32g-1x — Split a port group into one 32GFC interface, subport 1.
– 16g-4x — Split a port group into four 16GFC interfaces; supports 4x32GFC oversubscription.
– 16g-2x — Split a port group into two 16GFC interfaces using ports 1 and 3.
– 8g-4x — Split a port group into four 8GFC interfaces.
Default S4148U-ON: Depends on the port prole activated.
Command Mode PORT-GROUP
Usage Information
• The mode {FC | Eth} command congures a port group to operate at line rate and guarantees no trac
loss.
Interfaces 111