Reference Guide

Eth 1/1/31 20:01:d4:ae:52:1a:ee:54 100 Fc 1/1/20 10 FLOGI LOGGED_IN
Eth 1/1/31 20:01:d4:ae:52:1a:ee:5f 100 Fc 1/1/20 10 FLOGI LOGGED_IN
Eth 1/1/31 20:01:d4:ae:52:1a:f8:9c 100 Fc 1/1/20 10 FLOGI LOGGED_IN
OS10# show npg devices brief
Total NPG Devices = 4
ENode-Interface ENode-WWPN FCoE-Vlan Fabric-Intf Vfabric-Id LoginMethod Status
------------------------------------------------------------------------------
Eth 1/1/31 20:01:d4:ae:52:1a:ee:54 100 Fc 1/1/20 10 FLOGI LOGGED_IN
Eth 1/1/31 20:01:d4:ae:52:1a:ee:5f 100 Fc 1/1/20 10 FLOGI LOGGED_IN
Eth 1/1/31 20:01:d4:ae:52:1a:f8:9c 100 Fc 1/1/20 10 FLOGI LOGGED_IN
Node-Interface WWPN Vlan Fabric-Intf Vfabric-Id LoginMethod Status
-----------------------------------------------------------------------------------------------------
Fc 1/1/6 20:07:00:11:0d:a8:d4:00 100 Fc 1/1/5 10 FLOGI LOGGED_IN
Supported Releases 10.4.0E(R1) or later
F_Port and NPG commands
The following commands are supported on both F_Port and NPG modes:
clear fc statistics
Clears FC statistics for specied vfabric or bre channel interface.
Syntax
clear fc statistics [vfabric vfabric-ID | interface fibrechannel]
Parameters
• vfabric-ID — Enter the vfabric ID.
• fibrechannel — Enter the bre channel interface name.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# clear fc statistics vfabric 100
OS10# clear fc statistics interface fibrechannel1/1/25
Supported Releases 10.4.1.0 or later
fcoe
Adds FCoE parameters to vfabric.
Syntax
fcoe {fcmap fc-map | fcf-priority fcf-priority-value | fka-adv-period adv-
period | vlan-priority vlan-priority-value | keep-alive}
Parameters
• fc-map — Enter the FC map ID, ranging from 0xefc00-0xefcff.
• fcf-priority-value — Enter the FCF priority value, ranging from 1 to 255.
• adv-period — Enter the FCF keepalive advertisement period ranging from 8 to 90 seconds.
• vlan-priority-value — Enter the VLAN priority value, ranging from 0 to 7.
140 Fibre Channel