Reference Guide

• Port-channel with 1x40Gigabit Ethernet interface — 500
• Port-channel with 2x40Gigabit Ethernet interfaces — 250
• Change the forward-time in CONFIGURATION mode (4 to 30, default 15).
spanning-tree rstp forward-time seconds
• Change the hello-time in CONFIGURATION mode (1 to 10, default 2). With large congurations (especially those congurations with
more ports) Dell EMC recommends increasing the hello-time.
spanning-tree rstp hello-time seconds
• Change the max-age in CONFIGURATION mode (6 to 40, default 20).
spanning-tree rstp max-age seconds
View current interface parameters
OS10# show spanning-tree active
Spanning tree enabled protocol rstp with force-version rstp
Executing IEEE compatible Spanning Tree Protocol
Root ID Priority 32768, Address 90b1.1cf4.9b8a
Root Bridge hello time 2, max age 20, forward delay 15
Bridge ID Priority 32768, Address 90b1.1cf4.9b8a
We are the root
Configured hello time 2, max age 20, forward delay 15
Interface Designated
Name PortID Prio Cost Sts Cost Bridge ID PortID
-------------------------------------------------------------------
ethernet1/1/1 244.128 128 500 BLK 0 32768 90b1.1cf4.9b8a 128.244
ethernet1/1/2 248.128 128 500 BLK 0 32768 90b1.1cf4.9b8a 128.248
ethernet1/1/3 252.128 128 500 FWD 0 32768 90b1.1cf4.9b8a 128.252
ethernet1/1/4 256.128 128 500 BLK 0 32768 90b1.1cf4.9b8a 128.256
Interface
Name Role PortID Prio Cost Sts Cost Link-type Edge
----------------------------------------------------------
ethernet1/1/1 Altr 128.244 128 500 BLK 0 AUTO No
ethernet1/1/2 Altr 128.248 128 500 BLK 0 AUTO No
ethernet1/1/3 Root 128.252 128 500 FWD 0 AUTO No
ethernet1/1/4 Altr 128.256 128 500 BLK 0 AUTO No
Interface parameters
Set the port cost and port priority values on interfaces in L2 mode.
Port cost
Value that is based on the interface type. The previous table lists the default values. The greater the port cost, the
less likely the port is selected to be a forwarding port.
Port priority Inuences the likelihood that a port is selected to be a forwarding port in case that several ports have the same
port cost.
• Change the port cost of an interface in INTERFACE mode (1 to 200000000).
spanning-tree rstp cost cost
• Change the port priority of an interface in INTERFACE mode (0 to 240, default 128).
spanning-tree rstp priority priority-value
View current global parameter values
OS10# show spanning-tree active
Spanning tree enabled protocol rstp with force-version rstp
Executing IEEE compatible Spanning Tree Protocol
Root ID Priority 32768, Address 90b1.1cf4.9b8a
Root Bridge hello time 2, max age 20, forward delay 15
Bridge ID Priority 32768, Address 90b1.1cf4.9b8a
Layer 2
239