Reference Guide
reload ztd
Reboots the switch and enables ZTD after the reload.
Syntax
reload ztd
Parameters None
Default ZTD is enabled.
Command Mode EXEC
Usage Information Use the reload ztd command to automatically upgrade OS10 and/or activate new conguration settings. When
you reload ZTD, you are prompted to conrm the deletion of the startup conguration.
Example
OS10# reload ztd
Supported Releases 10.4.1.0 or later
show ztd-status
Displays the current ZTD status: enabled, disabled, or canceled.
Syntax
show ztd-status
Parameters None
Default None
Command Mode EXEC
Usage Information None
Examples
OS10# show ztd-status
-----------------------------------
ZTD Status : disabled
ZTD State : completed
Protocol State : idle
Reason : ZTD process completed successfully at Mon Jul 16 19:31:57 2018
-----------------------------------
OS10# show ztd-status
-----------------------------------
ZTD Status : disabled
ZTD State : failed
Protocol State : idle
Reason : ZTD process failed to download post script file
-----------------------------------
• ZTD Status — Current operational status: enabled or disabled.
• ZTD State — Current ZTD state: initialized, in-progress, successfully completed, failed, or canceled while in
progress.
• Protocol State — Current state of ZTD protocol: initialized, idle while waiting to enable or complete ZTD
process, waiting for DHCP post-hook callback, downloading les, installing image, executing pre-cong or post-
cong CLI commands, or executing post-ZTD script le.
• Reason — Description of a successful or failed ZTD process.
Supported Releases 10.4.1.0 or later
Getting Started 33