Reference Guide

ip igmp query-max-resp-time
Congures the maximum time for responding to a query advertised in IGMP queries.
Syntax
ip igmp snooping query-max-resp-time query-response-time
Parameters query-response-time—Enter the query response time in seconds, ranging from 1 to 25.
Default 10 seconds
Command Mode VLAN INTERFACE
Usage Information The no version of this command resets the query response time to default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp snooping query-max-resp-time 15
Supported Releases 10.4.1.0 or later
ip igmp version
Congures IGMP version.
Syntax
ip igmp version version-number
Parameters version-number—Enter the version number as 2 or 3.
Default 3
Command Mode VLAN INTERFACE
Usage Information The no version of this command resets the version number to the default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp version 2
Supported Releases 10.4.1.0 or later
show ip igmp snooping groups
Displays the details of IGMP snooping group membership.
Syntax
show ip igmp snooping groups [vlan vlan-id [ip-address]]
Parameters
• vlan-id—(Optional) Enter the VLAN ID, ranging from 1 to 4093.
• ip-address—(Optional) Enter the IP address of the multicast group.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show ip igmp snooping groups
Total Number of Groups: 480
IGMP Connected Group Membership
Group Address Interface Mode Expires
225.1.0.0 vlan3031 IGMPv2-Compat 00:01:26
388 Layer 3