Reference Guide
openow
Enters OPENFLOW conguration mode.
Syntax
openflow
Parameters None
Default None
Command Mode CONFIGURATION
Usage Information
All OpenFlow congurations are performed in this mode.
The no form of this command prompts a switch reload. If you enter yes, the system deletes all OpenFlow
congurations and the switch returns to the normal mode after the reload.
Example
OS10# configure terminal
OS10(config)# openflow
OS10 (config-openflow)#
Supported Releases 10.4.1 or later
probe-interval
Congures the echo request interval, in seconds, for the controller congured with the logical switch instance.
Syntax
probe-interval interval
Parameters interval—Enter the amount of time, in seconds, between the keepalive messages, also known as echo
requests, from 1 to 65,535.
Default 5 seconds
Command Mode OPENFLOW SWITCH CONFIGURATION
Usage Information None
Example
OS10 (config)# openflow
OS10 (config-openflow)# switch of-switch-1
OS10 (config-openflow-switch)# probe-interval 20
OS10 (config-openflow-switch)#
Supported Releases 10.4.1 or later
protocol-version
Species protocol version the logical switch interface uses.
Syntax
protocol-version version
Parameters version—Choose from one of the following:
OpenFlow 583