Reference Guide

To lter the routes for redistribution, combine route-maps and IP prex lists. If the route or packet matches the congured criteria, the
OS10 processes the route based on the permit or deny conguration of the prex list.
When a route-map and a prex list combine:
For a route map with the permit action:
If a route matches a prex-list set to deny, the route is denied
If a route matches a prex-list set to permit, the route is permitted and any set of actions are apply
For a route map with the deny action:
If a route matches a prex-list set to deny, the route is denied
If a route matches a prex-list set to permit, the route is denied
View both IP prex-list and route-map conguration
OS10(conf-router-bgp-neighbor-af)# do show ip prefix-list
ip prefix-list p1:
seq 1 deny 10.1.1.0/24
seq 10 permit 0.0.0.0/0 le 32
ip prefix-list p2:
seq 1 permit 10.1.1.0/24
seq 10 permit 0.0.0.0/0 le 32
View route-map conguration
OS10(conf-router-bgp-neighbor-af)# do show route-map
route-map test1, deny, sequence 10
Match clauses:
ip address prefix-list p1
Set clauses:
route-map test2, permit, sequence 10
Match clauses:
ip address prefix-list p1
Set clauses:
route-map test3, deny, sequence 10
Match clauses:
ip address prefix-list p2
Set clauses:
route-map test4, permit, sequence 10
Match clauses:
ip address prefix-list p2
Set clauses:
Match routes
Congure match criterion for a route-map. There is no limit to the number of match commands per route map, but keep the number of
match lters in a route-map low. The
set commands do not require a corresponding match command.
Match routes with a specic metric value in ROUTE-MAP mode, 0 to 4294967295.
match metric metric-value
Match routes with a specic tag in ROUTE-MAP mode, 0 to 4294967295.
match tag tag-value
Match routes whose next hop is a specic interface in ROUTE-MAP mode.
match interface interface
ethernet — Enter the Ethernet interface information.
port-channel — Enter the port-channel number.
vlan — Enter the VLAN ID number.
Access Control Lists
601