Reference Guide

Supported Releases 10.2.0E or later
clear ipv6 access-list counters
Clears IPv6 access-list counters for a specic access-list.
Syntax
clear ipv6 access-list counters [access-list-name]
Parameters access-list-name — (Optional) Enter the name of the IPv6 access-list to clear counters. A maximum of 140
characters.
Default Not congured
Command Mode EXEC
Usage Information If you do not enter an access-list name, all IP access-list counters clear. The counter counts the number of packets
that match each permit or deny statement in an access list. To get a more recent count of packets matching an
access list, clear the counters to start at zero. To view access-list information, use the show access-lists
command.
Example
OS10# clear ipv6 access-list counters
Supported Releases 10.2.0E or later
clear mac access-list counters
Clears counters for a specic or all MAC access lists.
Syntax
clear mac access-list counters [access-list-name]
Parameters access-list-name — (Optional) Enter the name of the MAC access list to clear counters. A maximum of 140
characters.
Default Not congured
Command Mode EXEC
Usage Information If you do not enter an access-list name, all MAC access-list counters clear. The counter counts the number of
packets that match each permit or deny statement in an access list. To get a more recent count of packets
matching an access list, clear the counters to start at zero. To view access-list information, use the show
access-lists command.
Example
OS10# clear mac access-list counters
Supported Releases 10.2.0E or later
deny
Congures a lter to drop packets with a specic IP address.
Syntax
deny [protocol-number | icmp | ip | tcp | udp] [A.B.C.D | A.B.C.D/x | any |
host ip-address] [A.B.C.D | A.B.C.D/x | any | host ip-address] [capture | dscp
value | fragment]
Access Control Lists 605