Users Guide

Table 7. Time zones and UTC offset (continued)
Continent/Country City UTC offset
Eastern −05:00
East-Indiana −05:00
Hawaii −10:00
Indiana-Starke −06:00
Michigan −05:00
Mountain −07:00
Pacific −08:00
Pacific-New −08:00
Samoa −11:00
UTC +00:00
WET +00:00
W-SU +03:00
Zulu +00:00
System Clock commands
clock set
Sets the system time.
Syntax
clock set time year-month-day
Parameters
time Enter time in the format hour:minute:second, where hour is 1 to 24;
minute is 1 to 60; second is 1 to 60. For example, enter 5:15 PM as 17:15:00.
year-month-day Enter year-month-day in the format YYYY-MM-DD, where YYYY is a four-digit
year, such as 2016; MM is a month from 1 to 12; DD is a day from 1 to 31.
Default Not configured
Command Mode EXEC
Usage
Information
Use this command to reset the system time if the system clock is out of synch with the NTP time. The
hardware-based real-clock time (RTC) resets to the new time. The new system clock setting applies
immediately.
Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S).
Also supported in SmartFabric mode starting in release 10.5.0.1.
Example
OS10# clock set 18:30:10 2017-01-25
Supported
Releases
10.2.1E or later
clock timezone
Configures the standard or user-defined time zone that OS10 applies on top of the system clock.
Syntax
clock timezone {standard-timezone standard-timezone-name | {timezone-string
hours minutes}}
System management 153