Users Guide

Example
OS10(conf-router-neighbor)# address-family ipv4 unicast
OS10(conf-router-bgp-neighbor-af)# route-map bgproutemap in
OS10(conf-router-template)# address-family ipv4 unicast
OS10(conf-router-bgp-template-af)# route-map bgproutemap in
Supported
Releases
10.4.1.0 or later
route-reflector-client
Configures a neighbor as a member of a route-reflector cluster.
Syntax
route-reflector-client
Parameters None
Default Not configured
Command Mode ROUTER-TEMPLATE
Usage
Information
The device configures as a route reflector, and the BGP neighbors configure as clients in the route-
reflector cluster. The no version of this command deletes all clients of a route reflector—the router no
longer functions as a route reflector.
Example
OS10(conf-router-template)# route-reflector-client
Supported
Releases
10.3.0E or later
router bgp
Enables BGP and assigns an AS number to the local BGP speaker.
Syntax
router bgp as-number
Parameters as-number—Enter the AS number range.
● 1 to 65535 in 2 byte
● 1 to 4294967295 in 4 byte
Default None
Command Mode CONFIGURATION
Usage
Information
The AS number can be a 16-bit integer. The no version of this command resets the value to the default.
Example
OS10(config)# router bgp 3
OS10(conf-router-bgp-3)#
Supported
Releases
10.3.0E or later
router-id
Assigns a user-given ID to a BGP router.
Syntax
router-id ip-address
Parameters ip-address — Enter an IP address in dotted decimal format.
Default First configured IP address or random number
680 Layer 3